Auto Up Operation does not Fully Close Power Window (Jam Protection Function is Activated)
Circuit diagnosis · Vehicles built from Nov 2005
DESCRIPTION
The driver door power window regulator motor is activated by operating the power window regulator master switch. The driver door power window regulator motor has motor, regulator and ECU functions.- CAUTION:
- When the power window regulator motor assembly (on the driver side) is reinstalled or replaced, the power window control system must be initialized.
INSPECTION PROCEDURE
| 1. INITIALIZE POWER WINDOW CONTROL SYSTEM |
Initialize the power window regulator motor assembly (on the driver side) (Click here).
Check that the power window operates normally by opening and closing the window.
- OK:
- AUTO UP/DOWN function operates normally.
|
|
||||
| NG | |
| 2. CHECK WINDOW GLASS SLIDING MOVEMENT (DRIVER SIDE) |
Remove the window regulator.
Install the window glass onto the door glass run.
Check if the door window regulator operates smoothly.
Check that the window glass slides smoothly when it up by hand.
- OK:
- Door window glass slides smoothly .
- HINT:
- Ensure the following:
- The window glass fits with the glass run without improper contact.
- Neither deformation nor foreign objects in the glass run.
- The window glass fits with the glass run without improper contact.
|
|
||||
| OK | ||
| ||
