Circuit diagnosis · Vehicles built Aug 2005 – Dec 2005
Versions by build date: Aug 2005 – Dec 2005from Jan 2006
DESCRIPTION
The MIL (Malfunction Indicator Lamp) is used to indicate vehicle malfunction detections by the ECM. When the ignition switch is turned on (IG), power is supplied to the MIL circuit, and the ECM provides the circuit ground which illuminates the MIL. The MIL operation can be checked visually: When the ignition switch is first turned on (IG), the MIL should be illuminated and should then turn off. If the MIL remains illuminated or is not illuminated, conduct the following troubleshooting procedure using an intelligent tester.
WIRING DIAGRAM
INSPECTION PROCEDURE
1. CHECK THAT MIL IS ILLUMINATED
Perform troubleshooting in accordance with the table below.