REASSEMBLY
Removal / installation · Vehicles built from Jan 2006
| 1. INSTALL HEATER CONTROL SUB-ASSEMBLY |
Install the bulb.

Engage the 2 claws and install the heater control.

| 2. INSTALL HEATER CONTROL BASE SUB-ASSEMBLY |
![]() ![]() |
Install the bulb.
Engage the 2 claws and install the heater control base.

| 3. INSTALL NO. 3 HEATER CONTROL KNOB |
![]() ![]() |
Install the bulb.
for Boost vent:

Install the gear.
Engage the 2 claws and connect the connector.

Engage the 2 claws and install the No. 3 heater control knob.



