Entry Interior Alarm does not Sound
Circuit diagnosis · Vehicles built from Aug 2005
DESCRIPTION
Each of the entry and start system's warnings uses the warning buzzer in the combination meter to alert the driver.The combination meter repeatedly sounds the warning buzzer when one of the following occurs: 1) the activation conditions for the entry and start system warning are met, or 2) the certification ECU assembly sends a warning buzzer signal via the CAN communication line to the combination meter (meter ECU).
WIRING DIAGRAM


INSPECTION PROCEDURE
- HINT:
- The entry and start system is part of the large-scale body multiplex communication system. The first step in any repair is to confirm the proper operation of the multiplex communication system. Perform the troubleshooting after the proper operation of the multiplex communication has been verified.
| 1. CHECK WHETHER ENGINE STARTS |
Check that the engine starts.
- HINT:
- The engine starts when the correct warning buzzer signal is transmitted from the steering lock ECU to the combination meter.
- OK:
- Engine starts.
|
|
||||
| OK | |
| 2. OPERATION OF COMBINATION METER ASSEMBLY (WARNING BUZZER) |
Place the electrical key in an undetectable area outside the vehicle, and turn the ignition switch on (IG) with all doors closed.
- OK:
- Warning buzzer sounds once.
|
|
||||
| OK | ||
| ||
