2005-2008 Yaris · Service Manual SECURITIES

Ignition Switch Circuit

Circuit diagnosis · Vehicles built from Nov 2006

DESCRIPTION

When the engine switch is turned to the on (IG) position, the battery positive voltage is applied to terminal IG of the theft warning ECU. When the battery positive voltage is applied to terminal IG of the ECU while the theft deterrent system is operating, the warning stops. Furthermore, the power supplied from terminal IG of the ECU is used as the power for the door courtesy switch and position switch, etc.

WIRING DIAGRAM

B165817E01

INSPECTION PROCEDURE


1. CHECK BASIC FUNCTION (ENTRY AND START FUNCTION)
  1. Check the basic function of the entry and start function.

    OK:
    Basic function operates normally.



NG
GO TO ENTRY AND START SYSTEM (for Starting)
OK

PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE


← Security Horn Circuit (from Nov 2006)Security Indicator Light Circuit (from Nov 2006) →