DTC CHECK / CLEAR
Troubleshooting · Vehicles built from Nov 2005
- HINT:
- DTCs which are stored in the transmission control ECU can be displayed on the intelligent tester.
| CHECK DTC (Using intelligent tester) |
Connect the intelligent tester to the DLC3.

Turn the ignition switch on (IG) and turn the intelligent tester ON.
Select the following menu items: Powertrain / Multi-Mode M/T.
Check DTCs and freeze frame data, and write them down.
See DTC chart to confirm the details of the DTCs (Click here).
- HINT:
- Intelligent testers can display current DTC data, pending DTC data and historical DTC data. Touch the [Current], [Pending] or [History] button on the DTC display screen.
- [Current]: Displays the current DTC data.
- [Pending]: Displays the pending DTC data
- [History]: Displays the historical DTC data (past codes).
| FREEZE FRAME DATA |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Read DTCs by selecting the following menu items: Powertrain / Multi-Mode M/T / DTC.
Select the parameter(s) to check the freeze frame data.
Note down the DTC(s) and freeze frame data.
- HINT:
- A "!" displayed to the left of DTC data shown in red indicates that freeze frame data has been recorded for that parameter.
- For further information about using the intelligent tester, refer to the instruction manual.
- A "!" displayed to the left of DTC data shown in red indicates that freeze frame data has been recorded for that parameter.
| CLEAR DTCs AND FREEZE FRAME DATA (Using intelligent tester) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Select the following menu items: Powertrain / Multi-Mode M/T / DTC / Clear.
Erase DTCs and freeze frame data by pressing the YES button on the tester.
- HINT:
- For further information about using the intelligent tester, refer to the instruction manual.