INSPECTION
Inspection · Vehicles built from Nov 2005
| INSPECT CLUTCH DISC ASSEMBLY |
![]() ![]() |
Using vernier calipers, measure the rivet head depth.
- Minimum rivet depth:
- 0.3 mm (0.012 in.)
Using a dial indicator, check the disc runout.

- Maximum runout:
- 0.8 mm (0.031 in.)
| INSPECT FLYWHEEL SUB-ASSEMBLY |
![]() ![]() |
Using a dial indicator, check the flywheel runout.
- Maximum runout:
- 0.1 mm (0.004 in.)
| INSPECT CLUTCH COVER ASSEMBLY |
![]() ![]() |
Using vernier calipers, measure the depth and width of wear of the diaphragm spring.
- Maximum:
- Depth A:
- 0.5 mm (0.020 in.)
- Width B:
- 6.0 mm (0.236 in.)
| INSPECT CLUTCH RELEASE BEARING ASSEMBLY |
![]() ![]() |
Turn the bearing by hand while applying force in the axial direction.
- HINT:
- The bearing is permanently lubricated and requires no cleaning or lubrication.




