INSTALLATION
Removal / installation · Vehicles built from Nov 2005
| 1. INSTALL MULTI-MODE MANUAL TRANSAXLE ECU (for LHD) |
![]() ![]() |
Engage the clip and install the transmission control ECU.
Install the 2 bolts.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Connect the 3 connectors.

| 2. INSTALL MULTI-MODE MANUAL TRANSAXLE ECU (for RHD) |
![]() ![]() |
Install the transmission control ECU with the bolt and screw.
- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Connect the 3 connectors.

| 3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY (for RHD) |
![]() ![]() |
Engage the claw of the hinge portion in the horizontal direction to install the glove compartment door assembly.
- NOTICE:
- Engage the claw in the horizontal direction, otherwise, installation failure caused by excessive play around the hinge portion will result.
Slightly deform the upper portion of the glove compartment door assembly to engage the stopper.

| 4. INSTALL UPPER INSTRUMENT PANEL |
| 5. PERFORM INITIALIZATION OF MULTI-MODE MANUAL TRANSMISSION ECU |
| 6. PERFORM LEARNING OF MULTI-MODE MANUAL TRANSMISSION SYSTEM |
| 7. PERFORM SYNCHRONIZATION POSITION CALIBRATION |



