2005-2008 Yaris · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Aug 2005


INSPECT 2ND COAST AND OVERDRIVE BRAKE DISC

C067852
  1. Check whether the sliding surfaces of the disc, plate and flange are worn or burnt.
    If necessary, replace them.

    NOTICE:
    1. If the lining of the disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all the discs.
    2. Before assembling new discs, soak them in ATF for at least 15 minutes.


INSPECT 2ND BRAKE BRAKE DISC

C067852
  1. Check whether the sliding surfaces of the disc, plate and flange are worn or burnt.
    If necessary, replace them.

    NOTICE:
    1. If the lining of the disc is peeling off or discolored or even if a part of the printed mark is defaced, replace all the discs.
    2. Before assembling new discs, soak them in ATF for at least 15 minutes.


INSPECT 1ST AND REVERSE BRAKE DISC

D025046
  1. Check to see if the sliding surface of the disc, plate and flange are worn or burnt.
    If necessary, replace them.

    NOTICE:
    1. If the lining of the disc is peeling off or discolored, or even if a part of the printed mark is defaced, replace all the discs.
    2. Before assembling new discs, soak in ATF for at least 15 minutes.


INSPECT 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY

C059838
  1. Using vernier calipers, measure the free length of the spring together with the spring seat.

    Standard free length:
    13.96 mm (0.5496 in.)

← DISASSEMBLY (from Aug 2005)REASSEMBLY (from Aug 2005) →