REMOVAL
Removal / installation · Vehicles built from Nov 2005
- NOTICE:
- When replacing the master cylinder, check the laser mark on the master cylinder flange portion, and then replace it.
- In the example shown in the illustration, replace the master cylinder with one with part No. 31420-0D100-02.


| Parts NO. |
RANK |
ENGINE |
| 31420-0D100-01 |
1 |
1KR-FE |
| 31420-0D100-02 |
2 |
1KR-FE |
| 31420-0D120-01 |
1 |
1ND-TV |
| 31420-0D120-02 |
2 |
1ND-TV |
| 31420-0D110-01 |
1 |
2SZ-FE |
| 31420-0D110-02 |
2 |
2SZ-FE |
| 1. REMOVE BRAKE BOOSTER ASSEMBLY |
| 2. REMOVE CLUTCH RESERVOIR TUBE |
Loosen the clip and remove the clutch reservoir tube from the clutch master cylinder assembly.
- HINT:
- Use a container to collect the fluid.
| 3. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE |
![]() ![]() |
Using SST, disconnect the flexible hose tube.
- SST
- 09023-00101
- HINT:
- Use a container to collect the fluid.
| 4. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1 |
Remove the 2 screws.

Disengage the 3 claws and remove the instrument panel under cover.
| 5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY |
![]() ![]() |
Remove the 2 nuts and the clutch master cylinder.


