INSTALLATION
Removal / installation · Vehicles built from Aug 2005
| 1. INSTALL YAW RATE SENSOR |
Connect the yaw rate sensor.
Install the yaw rate sensor with the 2 bolts.

- Torque:
- 14 N*m{ 143 kgf*cm , 10 ft.*lbf }
| 2. INSTALL CONSOLE BOX REAR COVER |
![]() ![]() |
Engage the 8 claws to install the console box rear cover.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 5.4 N*m{ 55 kgf*cm , 48 in.*lbf }
| 4. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION |
| 5. CHECK VSC SENSOR SIGNAL |

