INSPECTION
Inspection · Vehicles built from Nov 2006
| INSPECT DUTY VACUUM SWITCHING VALVE |
![]() ![]() |
Check the resistance.
Using an ohmmeter, measure the resistance between the terminals.
- Standard resistance:
Tester Connection
Specified Condition
1 - 2
23 to 26 Ω at 20°C (68°F)
Check the operation.

Check that air does not flow from port E to F.
Apply battery voltage across the terminals.

Check that air flows from port E to F.
If the operation is not as specified, replace the duty vacuum switching valve.

