INSTALLATION
Removal / installation · Vehicles built from Nov 2006
| 1.
INSTALL DUTY VACUUM SWITCHING VALVE |
 |
- Connect the 2 hoses to the duty vacuum switching valve.
Install the duty vacuum switching valve with the screw.
- Connect the duty vacuum switching valve connector and wire harness clamp.
| 2.
INSTALL NO. 2 CYLINDER HEAD COVER
|
 |
- Disengage the 4 fittings shown and install the No. 2 cylinder head cover by applying pressure to it.
- HINT:
- Make sure that the oil and the engine oil level dipstick are correctly installed before installing the No. 2 cylinder head cover.
| 3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}