2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Nov 2006


INSPECT HEATED OXYGEN SENSOR

A158288E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      2 (HT) - 4 (+B)
      11 to 16 Ω at 20°C (68°F)
      2 (HT) - 3 (E)
      10 kΩ or higher

      If the result is not as specified, replace the heated oxygen sensor.

← REMOVAL (from Nov 2006)INSTALLATION (from Nov 2006) →