INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT CAMSHAFT TIMING SPROCKET ASSEMBLY |
![]() ![]() |
Hold the hexagonal portion of camshaft assembly No. 1 in a vise.
- NOTICE:
- Do not disassemble the camshaft timing sprocket assembly (VVT controller).
Tighten the bolts of the camshaft timing sprocket assembly to the specified torque.
Plug either of the advanced side port of camshaft assembly No. 1 with your finger or tape.

Apply pressure to the other advanced side path.

- NOTICE:
- Cover the paths to prevent oil from splashing.
- HINT:
- The lock for the most retarded position will be released.
Make sure that the lock for the most retarded position of the camshaft timing sprocket is released and the sprocket can be moved smoothly within the movable range by hand.
- NOTICE:
- The camshaft timing sprocket will be locked if it is turned to the most retarded position.
Lock the camshaft timing sprocket in the most retarded position.

