INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT 2ND COAST AND OVERDRIVE BRAKE DISC |
![]() ![]() |
Check whether the sliding surfaces of the disc, plate and flange are worn or burnt.
If necessary, replace them.- NOTICE:
- If the lining of the disc is peeling off or discolored, or even if a part of the printed mark is defaced, replace all the discs.
- Before assembling new discs, soak them in ATF for at least 15 minutes.
- If the lining of the disc is peeling off or discolored, or even if a part of the printed mark is defaced, replace all the discs.
| INSPECT 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY |
![]() ![]() |
Using vernier calipers, measure the free length of the spring together with the spring seat.
- Standard free length:
- 15.85 mm (0.6240 in.)
| INSPECT 2ND BRAKE BRAKE DISC |
![]() ![]() |
Check whether the sliding surfaces of the disc, plate and flange are worn or burnt.
If necessary, replace them.- NOTICE:
- If the lining of the disc is peeling off or discolored, or even if a part of the groove is defaced, replace all the discs.
- Before assembling new discs, soak them in ATF for at least 15 minutes.
- If the lining of the disc is peeling off or discolored, or even if a part of the groove is defaced, replace all the discs.
| INSPECT 1ST AND REVERSE BRAKE DISC |
![]() ![]() |
Check whether the sliding surfaces of the disc, plate and flange are worn or burnt.
If necessary, replace them.- NOTICE:
- If the lining of the disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all the discs.
- Before assembling new discs, soak them in ATF for at least 15 minutes.
- If the lining of the disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all the discs.
| INSPECT 1ST AND REVERSE BRAKE RETURN SPRING SUB-ASSEMBLY |
![]() ![]() |
Using vernier calipers, measure the free length of the spring together with the spring seat.
- Standard free length:
- 21.71 mm (0.85472 in.)






