INSPECTION
Inspection · Vehicles built from Aug 2005
- HINT:
- The procedure described below is for the LHD. Use the same procedure for both the RHD and LHD, unless otherwise specified.
| INSPECT FRONT SEAT CUSHION COVER PAD (Built in Occupant Detection Sensor) |
Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.
- Standard resistance:
Tester Connection
Condition
Specified Condition
1 - 3
More than 29 N (3 kgf, 7 lbf) applied to occupant detection sensor
Below 100 Ω
Seat not occupied
1 MΩ or higher
