2005-2008 Yaris · Service Manual RESTRAINTS

INSPECTION

Inspection · Vehicles built from Nov 2005

HINT:
The procedure described below is for the LHD. Use the same procedure for both the RHD and LHD, unless otherwise specified.


INSPECT FRONT SEAT CUSHION COVER PAD (Built in Occupant Detection Sensor)

  1. B134760E02
    Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      More than 49 N (5 kgf, 11lbf) applied to occupant detection sensor
      Below 100 Ω
      Seat not occupied
      1 MΩ or higher

      If the result is not as specified, replace the front seat cushion cover pad.

← REMOVAL (from Nov 2005)INSTALLATION (from Nov 2005) →