2005-2008 Yaris · Service Manual BRAKE

INSPECTION

Inspection · Vehicles built from Nov 2005


INSPECT BRAKE DRUM INSIDE DIAMETER

F006408
  1. Using a brake drum gauge or the equivalent, measure the inside diameter of the brake drum.

    Standard inside diameter:
    202.5 mm (7.972 in.)

    Maximum inside diameter:
    204.0 mm (8.032 in.)

    If the inside diameter is greater than the maximum, replace the brake drum.


INSPECT BRAKE SHOE LINING THICKNESS

C130276
  1. Using a ruler, measure the thickness of the shoe lining.

    Standard thickness:
    4.2 mm (0.165 in.)

    Minimum thickness:
    1.0 mm (0.039 in.)

    If the lining thickness is equal to the minimum value or less, or if there is any severe or uneven wear, replace the brake shoe.

    NOTICE:
    If the brake shoes need replacing, they must be replaced as a set.


INSPECT BRAKE DRUM AND BRAKE SHOE LINING FOR PROPER CONTACT

R001564
  1. Apply chalk to the inside surface of the drum, then grind the brake shoe lining for proper fitting.
    If the contact between the drum and the shoe lining is improper, repair it using a brake shoe grinder or replace the brake shoe.

← DISASSEMBLY (from Nov 2005)REASSEMBLY (from Nov 2005) →