DISASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1.
REMOVE FRONT BRAKE SHOE |
 |
Using SST, remove the return shoe spring.
- SST
- 09703-30010
- NOTICE:
- Do not damage the wheel cylinder boot.
- Using SST, remove the tension spring.
- SST
- 09703-30010
- Using pliers, remove the shoe hold down spring, pin and front brake shoe.
| 2.
REMOVE PARKING BRAKE SHOE STRUT SET |
 |
- NOTICE:
- Do not disassemble the strut set, and be careful not to damage or bend any of the components.
| 3.
REMOVE REAR BRAKE SHOE |
 |
Using pliers, remove the shoe hold down spring, pin and rear brake shoe.
- Using needle-nose pliers, disconnect the parking brake cable from the parking brake shoe lever.
| 4.
REMOVE REAR WHEEL BRAKE CYLINDER ASSEMBLY |
 |
Using SST, separate the brake tube from the rear wheel brake cylinder.
- SST
- 09023-00100
- HINT:
- Use a container to catch the brake fluid.
- Remove the bleeder plug cap.
Remove the bleeder plug.
Remove the 2 bolts and remove the rear wheel brake cylinder.