REMOVAL
Removal / installation · Vehicles built from Nov 2005
| 1. REMOVE REAR WHEEL |
| 2. DRAIN BRAKE FLUID |
- NOTICE:
- Immediately wash off any brake fluid that comes into contact with any painted surfaces.
| 3. REMOVE REAR BRAKE DRUM SUB-ASSEMBLY |
Release the parking brake and remove the rear brake drum.
If the rear brake drum cannot be removed easily, perform the following procedure.
for Manual Transaxle:
Remove the shift lever knob.
Remove the shifting hole cover (Click here).
Remove the console box rear cover (Click here).
Remove the console box carpet (Click here).
Remove the rear console box (Click here).
Loosen the wire adjusting nut.

- NOTICE:
- Do not reuse the loosened nut.
Remove the hole plug.

Insert SST through the hole in the backing plate, pull the parking brake shoe lever toward the rear of the vehicle and remove the rear brake drum.

- SST
- 09921-00010
