2005-2008 Yaris · Service Manual RESTRAINTS

DATA LIST / ACTIVE TEST

System information · Vehicles built from Aug 2005


READ DATA LIST

HINT:
By accessing the DATA LIST using the intelligent tester, values of the switches and sensors can be read without removing any parts. Reading the DATA LIST is the first step of troubleshooting and is one method of shortening diagnostic time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the tester on.

  3. Read the DATA LIST according to the indication displayed on the tester.

    Combination Meter Assembly 
    Item
    Measurement Item/ Range (Display)
    Normal Condition
    Normal Condition
    P-Seatbelt Buckle SW
    Buckle switch (Front passenger side) /
    ON: Front passenger side seat belt is fastened
    OFF: Front passenger side seat belt is unfastened
    ON/OFF
    -
    Main Body ECU 
    Item
    Measurement Item/ Range (Display)
    Normal Condition
    Diagnostic Note
    D Seat Buckle SW
    Buckle switch (Driver side) /
    ON: Front driver side seat belt is fastened
    OFF: Front driver side seat belt is unfastened
    ON/OFF
    -


PERFORM ACTIVE TEST

HINT:
Performing the intelligent tester's ACTIVE TEST allows relays, VSV, actuators and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the tester on.

  3. Perform the ACTIVE TEST according to the indication displayed on the tester.

    Combination Meter Assembly 
    Item
    Test Details
    Diagnostic Note
    Indicat. Lamp D-seat Belt
    Front driver seat belt warning light / OFF or ON
    -
    Indicat. Lamp P-seat Belt
    Front passenger seat belt warning light / OFF or ON
    -

← DIAGNOSIS SYSTEM (from Aug 2005)Driver Side Seat Belt Warning Light does not Operate (from Aug 2005) →