INSPECTION
Inspection · Vehicles built from Aug 2005
| INSPECT FRONT DOOR HANDLE ASSEMBLY OUTSIDE LH |
![]() ![]() |
Check the resistance.
Using an ohmmeter, measure the resistance between the terminals when the trigger switch is operated.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 - 3
Switch released
10 kΩ or higher
1 - 3
Switch pressed in
Below 1 Ω
| INSPECT FRONT DOOR HANDLE ASSEMBLY OUTSIDE RH |
![]() ![]() |
Check the resistance.
Using an ohmmeter, measure the resistance between the terminals when the trigger switch is operated.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 - 3
Switch released
10 kΩ or higher
1 - 3
Switch pressed in
Below 1 Ω
| INSPECT BACK DOOR OUTSIDE HANDLE |
![]() ![]() |
Check the resistance of the lock switch.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
3 - 4
Switch released
10 kΩ or higher
3 - 4
Switch pressed in
Below 1 Ω
Check the resistance of the unlock switch.

Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Standard Resistance:
Tester Connection
Switch Condition
Specified Condition
1 - 2
Switch released
10 kΩ or higher
1 - 2
Switch pressed in
Below 1 Ω


