DISASSEMBLY
Removal / installation · Vehicles built from Nov 2005
| 1.
REMOVE INTAKE VALVE |
 |
- SST
- 09202-70020
Remove the valve stem cap.
Using SST, remove the valve spring retainer lock.
Remove the valve spring retainer, outer compression spring and intake valve from the cylinder head.
| 2.
REMOVE EXHAUST VALVE |
 |
- SST
- 09202-70020
Remove the valve stem cap.
Using SST, remove the valve spring retainer lock.
Remove the valve spring retainer, outer compression spring and exhaust valve from the cylinder head.
| 3.
REMOVE VALVE STEM OIL O SEAL OR RING |
 |
Using needle-nose pliers, remove the valve stem oil seal.
| 4.
REMOVE VALVE SPRING SEAT PLATE WASHER |
 |
Remove the valve spring seat plate washer from the cylinder head.
| 5.
REMOVE VALVE ROCKER ARM PIVOT |
 |
Remove the valve rocker arm pivot from the cylinder head.
| 6.
REMOVE WITH HEAD TAPER SCREW PLUG NO. 1 |
 |
Using a 6 mm socket hexagon wrench, remove the taper screw plug No. 1 and gasket.
| 7.
REMOVE STUD BOLT |
 |
Remove the 6 bolts indicated in the illustration.


| 8.
REMOVE RING PIN |
 |
Remove the 2 ring pins indicated in the illustration.