2005-2008 Yaris · Service Manual BRAKE

C1300/62 Skid Control ECU Malfunction

Diagnostic trouble codes · Vehicles built from Nov 2005

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the computer by self-diagnosis.
DTC No.
DTC Detecting Condition
Trouble Area
C1300/62
Malfunction in skid control ECU
ABS and TRACTION actuator (skid control ECU)

INSPECTION PROCEDURE

NOTICE:
When replacing the ABS and TRACTION actuator, perform zero point calibration (Click here).


1. RECONFIRM DTC
  1. Clear the DTC (Click here).

  1. Check if the same DTC is output (Click here).

    Result:
    Result
    Proceed to
    DTC output
    A
    DTC not output
    B



B
END
A

REPLACE ABS AND TRACTION ACTUATOR


← C1290/66 Steering Angle Sensor Zero Point Malfunction (from Nov 2005)C1336/39 Zero Point Calibration of Acceleration Sensor Undone (from Nov 2005) →