2005-2008 Yaris · Service Manual BRAKE

C1300/62 Skid Control ECU Malfunction

Diagnostic trouble codes · Vehicles built from Nov 2005

DESCRIPTION

The skid control ECU outputs this DTC if malfunctions are found in the circuit inside the computer by self diagnosis.
DTC No.
DTC Detecting Conditions
Trouble Areas
C1300/62
Malfunction in skid control ECU
Brake actuator (skid control ECU)

INSPECTION PROCEDURE


1. RECONFIRM DTC
  1. Clear the DTC (Click here).

  1. Check if the same DTC is output (Click here).

    Result:
    Result
    Proceed to
    DTC output
    A
    DTC not output
    B



B
END
A

REPLACE BRAKE ACTUATOR


← C1251/51 Open in Pump Motor Circuit (from Nov 2005)U0073/94 Control Module Communication Bus OFF (from Nov 2005) →