INSTALLATION
Removal / installation · Vehicles built from Jan 2006
| 1. INSTALL REAR SEAT INNER BELT ASSEMBLY |
for RH Side:

for 2 Point Type Rear Center Seat Belt:
- Install the rear seat inner belt with the bolt.
- Torque:
- 42 N*m{ 430 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Install the anchor plate with the arrow mark facing forward.
- Do not place the anchor plate over the locating mark area of the floor panel.
- Install the anchor plate with the arrow mark facing forward.
- Install the rear seat inner belt with the bolt.
for 3 Point Type Rear Center Seat Belt (60/40 Split Seat Type):

- Install the rear seat inner belt with the bolt.
- Torque:
- 42 N*m{ 430 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Install the anchor plate with the arrow mark facing forward.
- Do not place the anchor plate over the locating mark area of the floor panel.
- Install the anchor plate with the arrow mark facing forward.
- Install the rear seat inner belt with the bolt.
for LH Side:

Install the rear seat inner belt with the bolt.
- Torque:
- 42 N*m{ 430 kgf*cm , 31 ft.*lbf }
- NOTICE:
- Install the anchor plate with the arrow mark facing forward.
- Do not place the anchor plate over the locating mark area of the floor panel.
- Install the anchor plate with the arrow mark facing forward.
| 2. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY |
for 60/40 Split Seat Type:
Install the rear seat cushion cover pad sub-assembly (Click here).
for Fixed Seat Type:
Install the rear seat cushion cover pad sub-assembly (Click here).
