2005-2008 Yaris · Service Manual RESTRAINTS

INSTALLATION

Removal / installation · Vehicles built from Jan 2006


1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY

  1. B134910E01
    for RH Side:

    1. for 2 Point Type Rear Center Seat Belt:

      1. Install the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Install the anchor plate with the arrow mark facing forward.
      2. Do not place the anchor plate over the locating mark area of the floor panel.

    2. B134908E01
      for 3 Point Type Rear Center Seat Belt (for 60/40 Split Seat Type):
      1. Install the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Install the anchor plate with the arrow mark facing forward.
      2. Do not place the anchor plate over the locating mark area of the floor panel.

  1. B134905E01
    for LH Side:

    1. Install the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      1. Install the anchor plate with the arrow mark facing forward.
      2. Do not place the anchor plate over the locating mark area of the floor panel.


2. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
  1. for 60/40 Split Seat Type:

    1. Install the rear seat cushion cover pad sub-assembly (Click here).

  1. for Fixed Seat Type:

    1. Install the rear seat cushion cover pad sub-assembly (Click here).

← REMOVAL (from Jan 2006)COMPONENTS (from Aug 2005) →