DTC C1428 Motor Circuit Malfunction |
| DTC Code | DTC Detection Condition | Trouble Area |
| C1428 | With the ABS motor relay OFF and the ABS motor fail safe relay ON, an open in the motor circuit continues for 2 seconds or more. | Brake actuator assembly (Motor circuit) |
| 1.INSPECT SKID CONTROL ECU |
Turn the ignition switch off.
Make sure that there is no looseness at the locking part and the connecting part of the connectors.
Disconnect the A31 skid control ECU connector.
![]() |
Measure the resistance according to the value(s) in the table below.
| *1 | Front view of wire harness connector (to Skid Control ECU) |
| Tester Connection | Switch Condition | Specified Condition |
| A31-13 (GND2) - Body ground | Always | Below 1 Ω |
| Result | Proceed to |
| OK (for Sedan) | A |
| OK (for Hatchback) | B |
| NG | C |
|
| ||||
|
| ||||
| A | ||
| ||