Home › TRANSMISSION ยท U441E AUTOMATIC TRANSAXLE › DIFFERENTIAL OIL SEAL

DIFFERENTIAL OIL SEAL > REPLACEMENT

for Preparation Click here



1. REMOVE FRONT DRIVE SHAFT ASSEMBLY (for Sedan)
  1. Remove the front drive shaft assembly (Click here).



2. REMOVE FRONT DRIVE SHAFT ASSEMBLY (for Hatchback)
  1. Remove the front drive shaft assembly (Click here).



3. REMOVE NO. 2 TRANSAXLE CASE OIL SEAL


    D025377E01
  1. Using SST, remove the No. 2 transaxle case oil seal.

    SST
    09308-00010  



4. REMOVE TRANSAXLE CASE OIL SEAL


    D025378E01
  1. Using SST, remove the transaxle case oil seal.

    SST
    09308-00010  



5. INSTALL NO. 2 TRANSAXLE CASE OIL SEAL


    C181835
  1. Coat the lip of a new oil seal with MP grease.

  1. Using SST and a hammer, install the No. 2 transaxle case oil seal.

    SST
    09517-12010  
    09630-24014   (09620-24051)

    Drive in depth:
    2.6 to 3.6 mm (0.103 to 0.141 in.)

    NOTICE:
    Do not damage the oil seal lip.



6. INSTALL TRANSAXLE CASE OIL SEAL


    C181836
  1. Coat the lip of a new oil seal with MP grease.

  1. Using SST and a hammer, install the transaxle case oil seal.

    SST
    09316-60011   (09316-00011)

    Drive in depth:
    2.6 to 3.6 mm (0.103 to 0.141 in.)

    NOTICE:
    Do not damage the oil seal lip.



7. INSTALL FRONT DRIVE SHAFT ASSEMBLY (for Sedan)
  1. Install the front drive shaft assembly (Click here).



8. INSTALL FRONT DRIVE SHAFT ASSEMBLY (for Hatchback)
  1. Install the front drive shaft assembly (Click here).