Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY (w/o Wire Harness)


    B288295E02
  1. Install the front seat inner belt assembly with the bolt.

    Torque:
    41 N*m{ 420 kgf*cm , 30 ft.*lbf }

    NOTICE:
    Do not place the front seat inner belt over the convex areas of the front seat with frame adjuster.

    Text in Illustration 
    *a
    Convex



2. INSTALL FRONT SEAT INNER BELT ASSEMBLY (w/ Wire Harness)


    B270851E03
  1. Install the front seat inner belt assembly with the bolt.

    Torque:
    41 N*m{ 420 kgf*cm , 30 ft.*lbf }

    NOTICE:
    Do not place the front seat inner belt over the convex areas of the front seat with frame adjuster.

    Text in Illustration 
    *a
    Convex

  1. Engage the clamp.

  1. Install the 6 clamps.

  1. Connect the occupant detection sensor connector.



3. INSTALL FRONT SEAT ASSEMBLY
(Click here)


4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



5. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)
(Click here)