Home › Vehicle Interior › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET (for 3 Door)

CHILD RESTRAINT SEAT ANCHOR BRACKET (for 3 Door) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type LH Side)
(Click here)


2. REMOVE REAR SEAT ASSEMBLY (for 60/40 Split Seat Type RH Side)
(Click here)


3. REMOVE REAR SEAT ASSEMBLY (for Fold Down Seat Type)
(Click here)


4. REMOVE DECK BOARD ASSEMBLY


    B272608
  1. Remove the deck board.



5. REMOVE SPARE WHEEL COVER


    B272609
  1. Remove the spare wheel cover.



6. REMOVE NO. 2 ROOM LIGHT ASSEMBLY (w/ Luggage Compartment Room Light)


    E222045E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw.
    Text in Illustration 
    *1
    Protective Tape

  1. Disconnect the connector and remove the No. 2 room light assembly.



7. REMOVE JACK HANDLE (for RH Side)


8. REMOVE REAR FLOOR FINISH PLATE


    B272624
  1. Disengage the 4 claws and 4 guides and remove the rear floor finish plate.



9. REMOVE FRONT DOOR SCUFF PLATE RH


    B284313
  1. Disengage the 8 claws and remove the front door scuff plate.



10. REMOVE FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side.



11. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    B284315
  1. Remove the front door opening trim weatherstrip.



12. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure as for the RH side.



13. DISCONNECT FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY RH


    B282674
  1. Remove the 2 bolts and front seat belt outer bar sub-assembly, disconnect the floor anchor part of the front seat outer belt assembly.



14. DISCONNECT FRONT SEAT OUTER BELT BAR SUB-ASSEMBLY LH

HINT:
Use the same procedure as for the RH side.



15. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH


    B284318
  1. Disengage the 8 clips and 10 claws.

  1. Disengage the 3 guides and remove the quarter trim panel.



16. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

HINT:
Use the same procedure as for the RH side.



17. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH


    B284323
  1. Remove the bolt.

  1. Disengage the 2 claws and separate the rear seat 3 point type outer belt.



18. DISCONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

HINT:
Use the same procedure as for the RH side.



19. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)


    B284324
  1. Remove the 3 screws.

  1. Disengage the 3 clips and the 3 claws and remove the deck trim side panel.



20. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)

HINT:
Use the same procedure as for the RH side.



21. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY LH


    B282723
  1. Remove the 3 bolts and the child restraint seat anchor bracket sub-assembly LH.



22. REMOVE CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY RH


    B282724
  1. Remove the 3 bolts and the child restraint seat anchor bracket sub-assembly RH.



23. REMOVE REAR SEATBACK CENTER HINGE SUB-ASSEMBLY (for 60/40 Split Seat Type)


    B282725
  1. Remove the 2 bolts and the rear seatback center hinge sub-assembly.