STEERING WHEEL > REMOVAL |
| 1. PRECAUTION |
| 2. FRONT WHEELS FACING STRAIGHT AHEAD |
| 3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 4. REMOVE STEERING PAD |
| 5. REMOVE STEERING WHEEL ASSEMBLY |
![]() |
Remove the steering wheel assembly set nut.
Put matchmarks on the steering wheel assembly and the steering main shaft.
| *a | Matchmark |
Disconnect the connectors from the spiral cable.
![]() |
Using SST, remove the steering wheel assembly.
| *a | Hold |
| *b | Turn |
| 6. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch) |
![]() |
Remove the 2 screws.
Disengage the 4 claws and 4 guides and remove the steering pad switch assembly from the steering wheel assembly.
| 7. REMOVE CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System) |
![]() |
Disconnect the connector.
Remove the 2 screws and the cruise control main switch.
Disconnect the connector and remove the cruise control switch wire.
| 8. REMOVE STEERING WHEEL LOWER BOSS COVER |
![]() |
Disengage the 4 claws and remove the steering wheel lower boss cover.