CRUISE CONTROL SYSTEM > Cruise SET Indicator Light Circuit |
| 1.PERFORM ACTIVE TEST USING INTELLIGENT TESTER (CRUISE CONTROL SET INDICATOR LIGHT) |
Using the intelligent tester, perform the Active Test (Click here).
| Tester Display | Test Part | Control Range | Diagnostic Note |
| Indicat. SET | Cruise control SET indicator light | OFF/ON | Vehicle is stopped and engine is idling |
|
| ||||
| OK | |
| 2.READ VALUE USING INTELLIGENT TESTER (CRUISE CONTROL MAIN SWITCH) |
Using the intelligent tester, read the Data List (Click here).
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
| Cruise Control | Cruise Control / OFF or ON | OFF: Cruise Control unset ON: Cruise Control set | - |
| Result | Proceed to |
| OK | A |
| NG (for 2NZ-FE) | B |
| NG (for 1NZ-FE) | C |
|
| ||||
|
| ||||
| A | ||
| ||