CONSOLE - SHIFTER HOUSING
REMOVAL
1. Remove the floor console (1), (Refer to 23 - BODY/INTERIOR/CONSOLE - FLOOR - REMOVAL).
2. Remove the shift bezels (5), (Refer to 23 - BODY/INTERIOR/BEZEL - CONSOLE SHIFTER - REMOVAL).
3. Remove the screws (3) and separate the shifter console cover (2).
4. Disconnect the electrical connector (4 and 5) and remove the cover.
INSTALLATION
1. Connect the electrical connectors (4 and 5).
2. Position the cover (2) over the shifter (1) and insert the rear tabs into the slots in the I/P.
3. Install the screws (3).
4. Install the shift bezels (5), (Refer to 23 - BODY/INTERIOR/BEZEL - CONSOLE SHIFTER - INSTALLATION).
5. Install the floor console (1), (Refer to 23 - BODY/INTERIOR/CONSOLE - FLOOR - INSTALLATION).