REMOVAL
GAS ENGINE
1. Remove the accessory drive belt (Refer to 7 - COOLING/ACCESSORY DRIVE/DRIVE BELT - REMOVAL).
2. Drain engine coolant (Refer to 7 - COOLING - STANDARD PROCEDURE).
3. Raise vehicle (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE).
4. Remove accessory drive belt splash shield.
5. Drain cooling system (Refer to 7 - COOLING/ENGINE - STANDARD PROCEDURE).
6. Remove screws attaching water pump pulley (1). Remove pulley (1).
7. Remove water pump mounting bolts (2).
8. Remove water pump (3).
DIESEL
1. Remove timing chain (Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT/CHAIN AND SPROCKETS - REMOVAL).
2. Remove water pump mounting bolts (1).
3. Remove water pump (2).
4. Remove O-ring from water pump.