GRILLE OPENING REINFORCEMENT
REMOVAL
1. Remove the grille. (Refer to 23 - BODY/EXTERIOR/GRILLE - REMOVAL)
2. Remove the front fascia. (Refer to 13 - FRAME & BUMPERS/BUMPERS/FRONT FASCIA - REMOVAL)
3. Disconnect the electrical connectors (3).
4. Disconnect the rubber side flap push pin connectors.
5. Remove the seven bolts (2, 5 and 6) and remove the grille opening reinforcement (1).
6. Disconnect the headlamp units electrical connectors.
7. Remove the headlamp units. (Refer to 8 - ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - REMOVAL)
INSTALLATION
1. Install the headlamp units. (Refer to 8 - ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - INSTALLATION)
2. Connect the headlamp unit electrical connectors.
3. Install the grille opening reinforcement (1) and install the seven bolts. (2, 5 and 6)
4. Tighten the bolts to 10 N·m (85 in. lbs.).
5. Connect the rubber side flap and install the push pin connectors.
6. Connect the electrical connectors.
7. Install the front fascia. (Refer to 13 - FRAME & BUMPERS/BUMPERS/FRONT FASCIA - INSTALLATION)
8. Install the grille. (Refer to 23 - BODY/EXTERIOR/GRILLE - INSTALLATION)