Home › Drivetrain › Axle/Differential › AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT
Last Modified: 11-27-2007 1.6 A
Service Category: Drivetrain Section: Axle/Differential
Model Year: 2008 Model: LX570 Doc ID: RM00000306I005X
Title: AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT (2008 LX570)

REPLACEMENT

HINT:

  • Use the same procedures for the LH side and RH side.
  • The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL

2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH AXLE AND DIFFERENTIAL: FRONT AXLE HUB: REMOVAL (2008 LX570)+

3. REMOVE FRONT DISC BRAKE (FRONT): FRONT BRAKE: REMOVAL (2008 LX570)+

4. REMOVE FRONT AXLE HUB BOLT LH

(a) Using SST and a screwdriver or equivalent to hold the axle hub, remove the front axle hub bolt.

SST: 09650-17011

NOTICE:

Do not damage the threads of the hub bolt.

5. INSTALL FRONT AXLE HUB BOLT LH

(a) Temporarily install a washer and hub nut to a new hub bolt as shown in the illustration.

NOTICE:

Install a hub nut to prevent damage to the hub bolt.

(b) Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

(c) Remove the washer and hub nut.

NOTICE:

Do not damage the threads of the hub bolt.

6. INSPECT FRONT AXLE HUB BEARING LOOSENESS AXLE AND DIFFERENTIAL: FRONT AXLE HUB: ON-VEHICLE INSPECTION (2008 LX570)+

7. INSPECT FRONT AXLE HUB RUNOUT AXLE AND DIFFERENTIAL: FRONT AXLE HUB: ON-VEHICLE INSPECTION (2008 LX570)+

8. INSTALL FRONT DISC BRAKE (FRONT): FRONT BRAKE: INSTALLATION (2008 LX570)+

9. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH AXLE AND DIFFERENTIAL: FRONT AXLE HUB: INSTALLATION (2008 LX570)+

10. INSTALL FRONT WHEEL

Torque: 131 N·m (1336 kgf·cm, 97 ft·lbf)