Home › Drivetrain › Transfer/4wd/Awd › JF2A TRANSFER / 4WD / AWD: 4WD CONTROL ECU
Last Modified: 11-27-2007 1.6 A
Service Category: Drivetrain Section: Transfer/4wd/Awd
Model Year: 2008 Model: LX570 Doc ID: RM0000030J0006X
Title: JF2A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: INSTALLATION (2008 LX570)

INSTALLATION

1. INSTALL 4WD CONTROL ECU

(a) Install the ECU with the bolt.

Torque: 13 N·m (127 kgf·cm, 9 ft·lbf)

(b) Connect the 2 ECU connectors.

2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

3. INSTALL INSTRUMENT PANEL BOX DOOR KNOB INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY SUPPLEMENTAL RESTRAINT SYSTEMS: KNEE AIRBAG ASSEMBLY (for Front Passenger Side): INSTALLATION (2008 LX570)+

5. INSTALL COWL SIDE TRIM BOARD RH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

7. INSTALL FRONT DOOR SCUFF PLATE RH INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION (2008 LX570)+

8. INSTALL INNER NO. 1 INSTRUMENT PANEL BRACKET COVER RH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

9. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION (2008 LX570)+

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION (2008 LX570) .