Home › Engine/Hybrid System › Fuel System › 3UR-FE FUEL: FUEL FILTER
Last Modified: 11-27-2007 1.6 A
Service Category: Engine/Hybrid System Section: Fuel System
Model Year: 2008 Model: LX570 Doc ID: RM0000039W6007X
Title: 3UR-FE FUEL: FUEL FILTER: REPLACEMENT (2008 LX570)

REPLACEMENT

1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

(a) Remove the fuel suction with pump and gauge tube assembly 3UR-FE FUEL: FUEL PUMP: REMOVAL (2008 LX570) .

2. REMOVE FUEL SENDER GAUGE ASSEMBLY 3UR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: REMOVAL (2008 LX570)+

3. REMOVE NO. 1 FUEL SUB-TANK 3UR-FE FUEL: FUEL PUMP: DISASSEMBLY (2008 LX570)+

4. REMOVE FUEL PUMP 3UR-FE FUEL: FUEL PUMP: DISASSEMBLY (2008 LX570)+

5. REMOVE FUEL MAIN VALVE ASSEMBLY

(a) Remove the fuel main valve from the fuel filter case.

(b) Remove the 2 O-rings from the fuel main valve.

6. REMOVE NO. 1 FUEL SUCTION SUPPORT

(a) Detach the 2 claws from the claw holes.

7. INSTALL NO. 1 FUEL SUCTION SUPPORT

(a) Attach the 2 claws to the claw holes.

8. INSTALL FUEL MAIN VALVE ASSEMBLY

(a) Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel main valve.

(b) Install the fuel main valve to the fuel filter case.

NOTICE:

Make sure the O-rings are not cut or pinched during the installation.

9. INSTALL FUEL PUMP 3UR-FE FUEL: FUEL PUMP: REASSEMBLY (2008 LX570)+

10. INSTALL NO. 1 FUEL SUB-TANK 3UR-FE FUEL: FUEL PUMP: REASSEMBLY (2008 LX570)+

11. INSTALL FUEL SENDER GAUGE ASSEMBLY 3UR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION (2008 LX570)+

12. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

(a) Install the fuel suction with pump and gauge tube assembly 3UR-FE FUEL: FUEL PUMP: INSTALLATION (2008 LX570) .