Home › Suspension › Suspension Control System › SUSPENSION CONTROL: HEIGHT CONTROL ACCUMULATOR
Last Modified: 11-27-2007 1.6 A
Service Category: Suspension Section: Suspension Control System
Model Year: 2008 Model: LX570 Doc ID: RM0000039ZW001X
Title: SUSPENSION CONTROL: HEIGHT CONTROL ACCUMULATOR: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE TAILPIPE ASSEMBLY 3UR-FE INTAKE / EXHAUST: EXHAUST PIPE: REMOVAL (2008 LX570)+

2. REMOVE CENTER EXHAUST PIPE ASSEMBLY 3UR-FE INTAKE / EXHAUST: EXHAUST PIPE: REMOVAL (2008 LX570)+

3. REMOVE HEIGHT CONTROL UNIT INSULATOR SUSPENSION CONTROL: CONTROL VALVE ASSEMBLY: REMOVAL (2008 LX570)+

4. DISCHARGE SUSPENSION FLUID PRESSURE SUSPENSION CONTROL: ACTIVE HEIGHT CONTROL PUMP AND MOTOR: REMOVAL (2008 LX570)+

5. REMOVE NO. 7 HEIGHT CONTROL TUBE



(a) Using a union nut wrench, remove the control tube from the control valve and pump accumulator.

6. REMOVE SUSPENSION CONTROL PUMP ACCUMULATOR ASSEMBLY



(a) Remove the 3 nuts and pump accumulator.