Home › Suspension › Suspension Control System › SUSPENSION CONTROL: ABSORBER CONTROL SWITCH
Last Modified: 11-27-2007 1.6 A
Service Category: Suspension Section: Suspension Control System
Model Year: 2008 Model: LX570 Doc ID: RM000003A0H001X
Title: SUSPENSION CONTROL: ABSORBER CONTROL SWITCH: REMOVAL (2008 LX570)

REMOVAL

1. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

3. REMOVE PARKING BRAKE HOLE COVER INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

4. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 LX570)+

5. REMOVE POSITION INDICATOR HOUSING ASSEMBLY AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: PATTERN SELECT SWITCH: REMOVAL (2008 LX570)+

6. REMOVE SWITCH WIRE AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: DISASSEMBLY (2008 LX570)+

7. REMOVE CONSOLE BOX POCKET AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: DISASSEMBLY (2008 LX570)+

8. REMOVE LOWER POSITION INDICATOR HOUSING AB60F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: DISASSEMBLY (2008 LX570)+

9. REMOVE INTEGRATION CONTROL AND PANEL SUB-ASSEMBLY (ABSORBER CONTROL SWITCH)

(a) Disconnect the connector.

(b) Remove the 5 screws and then remove the integration control and panel from the position indicator housing.