MIL Check
Precautions: General safety (00)
1)Set ignition “ON” (with engine at stop) and check that MIL (1) come on.
If MIL does not light up but engine can be started, go to MIL Does Not Come ON with Ignition “ON” and Engine Stopped (but Engine Can Be Started):D16AA for troubleshooting.
If MIL does not light with ignition “ON” and engine does not start though it is cranked up, go to Inspection of ECM and Its Circuits:D16AA.
If MIL does not light up but engine can be started, go to MIL Does Not Come ON with Ignition “ON” and Engine Stopped (but Engine Can Be Started):D16AA for troubleshooting.
If MIL does not light with ignition “ON” and engine does not start though it is cranked up, go to Inspection of ECM and Its Circuits:D16AA.
2)Start engine and check that MIL turns off. If MIL remains on and no DTC is stored in ECM, go to MIL Remains ON after Engine Starts:D16AA for troubleshooting.
