Tightening Torque Specifications
Precautions: Precautions for Handling Battery · Precautions for Replacing Battery · General safety (00)
NOTE:
For fastener(s) with * (asterisk) below, refer to the specified procedure in “Repair Instructions”.
| Fastening part | Tightening torque | Note | ||
|---|---|---|---|---|
| N·m | kgf-m | lbf-ft | ||
| Battery bracket bolt | 23 | 2.3 | 17.0 |
 |
| Battery tray bolt | 8.8 | 0.90 | 6.5 |
|
| Battery band bolt | 23 | 2.3 | 17.0 |
|
| Generator adjuster bolt | 25 | 2.5 | 18.5 |
|
| Pivot bolt | 48 | 4.9 | 35.5 |
|
| Generator bolt | 25 | 2.5 | 18.5 |
|
| “B” terminal nut | 11 | 1.1 | 8.5 |
|
| Generator bracket bolt (with tensioner pulley)* | 25 | 2.5 | 18.5 |
|
| Tensioner pulley bolt | 45 | 4.6 | 33.5 |
|
| Bearing retainer screw | 2.3 | 0.23 | 2.0 |
|
| Stator assembly bolt | 6.0 | 0.61 | 4.5 |
|
| Pulley nut | 130 | 13.3 | 96.0 |
|
| Brush holder assembly screw | 2.0 | 0.20 | 1.5 |
|
| Rear end cover bolt | 4.5 | 0.46 | 3.5 |
|
Reference:
For the tightening torques of fasteners not specified in this page, refer to: