DTC B1093-01 / B1093-95 / B1094-01 / B1094-95

Precautions: Precautions for Air Bag System Service · Precautions for Handling and Storage of Air Bag System Components · Precautions for Disposal of Air Bag and Seat Belt Pretensioner · Precautions for Restraint · General safety (00)

DTC Detecting Condition and Trouble Area

DTC detecting condition	Trouble area
B1093-01: Side Impact Sensor No Response (Driver Side) Driver-side front side-impact sensor has communicated with no response.	•Driver-side and/or passenger-side front side-impact sensor circuit •Driver-side and/or passenger-side front side-impact sensor •SDM
B1093-95: Side Impact Sensor Communication Data Inconsistent (Driver Side) Driver-side front side-impact sensor has communicated with inconsistent ID code.
B1094-01: Side Impact Sensor No Response (Passenger Side) Passenger-side front side-impact sensor has communicated with no response.
B1094-95: Side Impact Sensor Communication Data Inconsistent (Passenger Side) Passenger-side front side-impact sensor has communicated with inconsistent ID code.

DTC Troubleshooting

Step	Action	Yes	No
1	Was “Air Bag Diagnostic System Check” performed?	Go to Step 2.	Go to Air Bag Diagnostic System Check.
2	DTC check 1)Check if any of the following DTC is detected. •B1093-14, B1093-15 or B1093-87 (DTC B1093-01 or DTC B1093-95) •B1094-14, B1094-15 or B1094-87 (DTC B1094-01 or DTC B1094-95) Is relevant DTC detected?	Go to applicable DTC diagnosis flow.	Go to Step 3.
3	Front side-impact sensor check 1)Check that ignition is “OFF”. 2)Replace front side-impact sensor. 3)Set ignition “ON”. 4)Check for DTC. Is DTC detected?	Replace SDM and recheck DTC.	End.

NOTE:

Upon completion of inspection and repair work, perform the following items.

•Reconnect all air bag system components and check that all components are properly mounted.
•Clear DTCs, referring to DTC Clearance if any DTC is detected.
•Repeat Air Bag Diagnostic System Check to check that the trouble has been solved.