Scan Tool Data
Precautions: Precautions for Diagnosing Trouble · Precautions for Adaptive Cruise Control System · Precautions for Replacing RBS Control Module · General safety (00)
RBS Control Module
Refer to Scan Tool Data.
ECM
NOTE:
•If communication between SUZUKI scan tool and ECM is not possible, perform the following checks:
—Check communication condition between PC and VCI using SUZUKI scan tool function.
—Check DLC power circuit and ground circuit.
—Check DLC cable. If necessary, check DLC cable by substituting a known-good DLC cable.
—Check CAN communication system. (“Control Module Communication Bus Off” is detected in any control module.)
—M16A model: 
—K14C model:
—D16AA model:
—K14C model:
—D16AA model:
—Check ECM power circuit and ground circuit.
—M16A model:
—K14C model:
—D16AA model:
—K14C model:
—D16AA model:
•*: Applicable to M16A model and K14C model.
| Scan tool data | Vehicle condition | Normal condition / Reference value |
|---|---|---|
| Cruise RES/ACC Switch | RES/+ switch pressed | ON |
| RES/+ switch released | OFF | |
| Cruise SET/COAST Switch | SET/– switch pressed | ON |
| SET/– switch released | OFF | |
| Cruise CANCEL Switch | CANCEL switch pressed | ON |
| CANCEL switch released | OFF | |
| Cruise ON/OFF Switch | CRUISE (main) switch pressed | Pushed |
| CRUISE (main) switch released | Released | |
| Distance Setting Switch (*) | Distance switch pressed | ON |
| Distance switch released | OFF |