Scan Tool Utility Table
Precautions: Precautions for Diagnosing Trouble · Precautions for Replacing Remote Controller · Precautions for Remote Controller Disposal · Precautions for Replacing Keyless Start Control Module · Precautions for Control Systems · General safety (00)
SUZUKI scan tool has setting change function of keyless start control module as follows. For details of SUZUKI scan tool, refer to its Operator's Manual.
NOTE:
Some data in the table below may either be applicable or not applicable depending on the model.
| Item | Setting | Description |
|---|---|---|
| Keyless Start System | ON / OFF | Setting of each inside and outside antenna (radio wave transmission allowed / not allowed) can be changed. |
| Answer-back (Outside buzzer) | ON / OFF | Setting (active / disabled) for outside warning buzzer during answer-back can be changed. |
| Remote Controller Area Warning | ON / OFF | Setting (active / disabled) for warning buzzer (in combination meter) during remote controller out of detection area alarm can be changed. |
| Remote Controller Battery Warning | ON / OFF | Setting (active / disabled) for remote controller battery run down warning can be changed. |
| Security Alarm | ON / OFF | Setting (active / disabled) for security alarm mode can be changed. |