Precautions for Replacing Keyless Start Control Module
Precautions: Precautions for Diagnosing Trouble · Precautions for Replacing Remote Controller · Precautions for Remote Controller Disposal · Precautions for Control Systems · General safety (00)
•When replacing the keyless start control module, replace it with new one.
•After keyless start control module is replaced with new one, perform “Immobilizer Key Registration” using SUZUKI scan tool.
•When keyless start control module and ECM are replaced at the same time, refer to ECM Registration:Keyless Push Start Model for their registration.
•All of remote controllers must be ready for the registration.
•After keyless start control module is replaced with new one, perform “Immobilizer Key Registration” using SUZUKI scan tool.
•When keyless start control module and ECM are replaced at the same time, refer to ECM Registration:Keyless Push Start Model for their registration.
•All of remote controllers must be ready for the registration.