Remote Controller Registration
Precautions: Precautions for Diagnosing Trouble · Precautions for Replacing Remote Controller · Precautions for Remote Controller Disposal · Precautions for Replacing Keyless Start Control Module · Precautions for Control Systems · General safety (00)
NOTE:
Refer to Operator’s Manual of SUZUKI scan tool for the immobilizer registration.
•Register remote controller ID code using “Immobilizer Key Registration” function in SUZUKI scan tool.
•Remote controller registration is performed through “Immobilizer Key Registration”, and this registers the immobilizer transponder code.
•Performing “Immobilizer Key Registration” clears all of the ID codes already registered. Prepare all of the remote controllers.
•It is possible to register 4 remote controllers in keyless start control module.
•If the keyless start control module is replaced, register all of the remote controllers.
•If all of the remote controllers are lost, register remote controllers after replacing keyless start control module.
•Remote controller registration is performed through “Immobilizer Key Registration”, and this registers the immobilizer transponder code.
•Performing “Immobilizer Key Registration” clears all of the ID codes already registered. Prepare all of the remote controllers.
•It is possible to register 4 remote controllers in keyless start control module.
•If the keyless start control module is replaced, register all of the remote controllers.
•If all of the remote controllers are lost, register remote controllers after replacing keyless start control module.