Outside Warning Buzzer Inspection
Precautions: Precautions for Diagnosing Trouble · Precautions for Replacing Remote Controller · Precautions for Remote Controller Disposal · Precautions for Replacing Keyless Start Control Module · Precautions for Control Systems · General safety (00)
1)Connect SUZUKI scan tool to DLC with ignition “OFF”.
2)Set ignition “ON”.
3)Select “Warning buzzer (Outside)” function in “Active Test” mode.
4)Check that outside warning buzzer sounds.
If check result is not as specified, check applicable circuit for open or short. If circuit is normal, replace outside warning buzzer and recheck it.
If check result is not as specified, check applicable circuit for open or short. If circuit is normal, replace outside warning buzzer and recheck it.